ArizonaShooting.com

"The #1 Resource for Shooters in Arizona!"
It is currently November 19th, 2017, 12:05 pm


All times are UTC - 7 hours


Custom Search





Post new topic Reply to topic  [ 65 posts ]  Go to page Previous  1, 2, 3, 4, 5
Author Message
 Post subject: Re: 585 HE -- Cases In Production --
New postPosted: June 25th, 2017, 7:40 pm 
Offline
AZS Regular
AZS Regular

Joined: November 26th, 2011, 4:52 pm
Posts: 146
Guys asking about strong economical bolt gun to use for 28ga and
410 ga and 32ga with brass cases and higher pressures than plastic cases.
They can use a MN bolt action, here is pic of one with
our 585 case in the action.Guys can get Magtech brass cases or have
RMC make them....Guys can make 32ga case from 500 NE,
410s from 9.3 x 74 brass, etc..

Image

Here is picture of our 416 HSM case sectioned next to original
BMG case on the right sectioned, to show that we still have
enough thickness in the sides to handle high pressure,
in a case with 310 gr capacity..We are getting the wildcatting
work set up so we can do at least hundred a month.
We have lots of 585s, 375HEs, 416 HEs, 408 HEs.....
And working toward getting 416 HSMs in big numbers.

Image

Here's comparison of 416 target cases, 1st 416 HE, have whole bunch.
Second is model of what I'd have made on medium machine, if I could,
the 416 HE Long. It has capacity of 230gr..
Third is our 416 HSM which we are working on making by wildcatting bmg
cases, And if had run long cases, make longer 375 HE necking down 416 ..

Image


Bryan Litz just recently shot 3 shot group at 2 miles using Paul
Phillips heavy barreled, target rifle built by Lethal Precision in
375 Lethal Mag(585HE necked down, very similiar to 375HE )...
It grouped 17.5 inches tall by 22 inches wide.

Applied Ballistics shooter Mitch Fitzpatrick just hit 3 of 5 at 3520 yards,
weekend 10-13th at Valdina Ranch , west of San Antonio.
Also used the 375 LM case similar to our 375 HE
Great shooting at the 2017 World's Longest Shot Challenge. Ed


Top
 Profile  
 
 Post subject: Re: 585 HE -- Cases In Production --
New postPosted: July 23rd, 2017, 1:36 pm 
Offline
AZS Regular
AZS Regular

Joined: November 26th, 2011, 4:52 pm
Posts: 146
The 12ga FH case now is in the new COTW book on
last page in the wildcat section, I think page 324.
They gave good credit to Rob for the idea of that case....


The model 416 HE long case in middle, hydro formed one,

has case capacity of 240 gr, and the 416 HSM in picture,

on the right, we fired a case twice, capacity is 320gr.. Ed..

Image


More info out now; short, fat cases sticking, pockets not lasting as expected.
Trying to get best speeds the things raising pressures are bad case
proportions, too sharp of shoulders, too fast of powders...........
and debth of the bullet into the powder space, as shown in the picture below..
My 375, 416, etc testing, bullets loaded like bottom one, in longer freebore....Ed.

Image


Top
 Profile  
 
 Post subject: Re: 585 HE -- Cases In Production --
New postPosted: September 4th, 2017, 12:49 pm 
Offline
AZS Regular
AZS Regular

Joined: November 26th, 2011, 4:52 pm
Posts: 146
Here is case measurements for our 416 HE target case
made from our 585 HE big belted case. Ed

Image


Here is picture of 375 HE left, 416 HE next, 416 HSM right..

Image


Here, tentative specs, 416 HSM case we are doing from bmg brass,

Image



A 375 HE, with Lawton action, few are being done with those .....

Image


Top
 Profile  
 
 Post subject: Re: 585 HE -- Cases In Production --
New postPosted: October 9th, 2017, 1:37 am 
Offline
AZS Regular
AZS Regular

Joined: November 26th, 2011, 4:52 pm
Posts: 146
A 585 HE ...shot with moderate heavy load......

https://scontent.cdninstagram.com/t50.2 ... 3184_n.mp4


Here is a 375 HE target gun set up, by Asteroid Precision...

Image


Here is video of it being tested... And with a 350gr bullet about 3450-3475,

bolt opened easily with one finger...And he's just getting started

and is checking on better powder, Ed..



https://www.facebook.com/AsteroidPrecis ... tion=group


Top
 Profile  
 
 Post subject: Re: 585 HE -- Cases In Production --
New postPosted: November 10th, 2017, 7:05 pm 
Offline
AZS Regular
AZS Regular

Joined: November 26th, 2011, 4:52 pm
Posts: 146
Here is recap simple setup to get faster loads with 12ga sabots

& slugs, Example using break actions...., reaming chamber

in a 12ga break action to 3.5" with a 3.5" 12ga reamer, that isn't

something needing special order, and use 3.5" plastic cases , or

get 3.5" brass cases made. With mag shotgun primers and

our slower powder loads you can get a quarter more speed,

which gives 50% more energy...


585 Hubel Express video, 190ft/lbs recoil, heavy load, gun little light.....

https://www.youtube.com/watch?v=tyS9zZ8ElJA


Another view of Asteroid Precision's.... 375 HE target gun,

Image


Here is our 416 HSM we are developing next to 416 Barrett, Ed

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 65 posts ]  Go to page Previous  1, 2, 3, 4, 5


All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group