Joined: June 1st, 2015, 7:39 am
Location: Surprise/N Phoenix, AZ
|Ghost Inc.Ghost was founded in 2000. They know triggers and Glocks, it shows. Their strong
points are treating you the way you should be treated and their unconditional
lifetime guarantee - "If you ain't happy, they ain't happy". This "Lifetime"
guarantee means as long as they are in business, you can return any defective
Ghost Inc. manufactured part for a full refund or exchange.GHOST BULLET FORWARD SLIDE RELEASEYour Price: $18.99
The Patent Pending GHOST BULLET FORWARD SLIDE RELEASE: Combat Black Finish!
The concept of the BULLET FORWARD SLIDE RELEASE came from DAVE SPAULDING.
- FORWARD IS FASTER
- FORWARD PREVENTS OPERATOR ERRORS AND MALFUNCTIONS
- BULLET PROOF DESIGN
- LEFTY FRIENDLY
Thanks Dave! The BULLET FORWARD SLIDE RELEASE (BFSR) is designed for aggressive
manipulations (read gross motor execution) for positive slide releases and slide
stopping power under the most adverse conditions. The Problem: Using the modern
technique (thumbs forward) you can do one of two BAD things: 1. Your thumb can push
UP the slide release locking the pistol open during recoil while ammo is still in the pistol.
2. Your thumb can FORCE the slide release down preventing the pistol from locking open
when empty. The Solution: The BULLET FORWARD SLIDE RELEASE prevents these
occurrences by placing the slide release tab forward and between your thumbs! This
forward thinking enables you to dominate your GLOCK! This part is made with the finest
Fits Only 3 Pin GLOCKs. Models: 17 (3 Pin Only),18,19,20, 21,22,23,24,25,26,27,28,29,
Lifetime Warranty through Ghost Inc!GHOST EXTENDED MAGAZINE RELEASEYour Price: $14.99
The Ghost Extended Magazine Release, is designed so that you can drop a magazine
without changing your firing grip and so you do not have to modify your Glock's frame.
It is designed to give you the maximum surface area possible for comfort and speed of
release. Easy installation, remove the old magazine release install the Ghost Extended
Magazine Release body and then snap the ergonomic tear drop button into place. To
remove the Ghost Extended Magazine Release pop off the button and remove the body.
For a semi-permanent installation use a drop of glue for plastics on the button's leg then
snap it into place. You may use the Ghost Extended Magazine Release for all lawful
purposes. If you are going to use for self defense check to insure that the magazine is
not released inadvertently.
Functions on all models except: 20/20SF/21/21/29/30/30SF/30S/36 & GEN 4's.GHOST PRO CONNECTOR FOR GLOCK 42 / 43Your Price: $33.99
THIS IS THE SAME CONNECTOR FOR BOTH THE 42 AND 43!
When you first receive this connector, install it first before trimming/reducing. Apply
extra pressure and see if it releases the firing pin. If it does with extra pressure you will
trim down very little to get a clean smooth release.
This is the connector long sought after by Glock 42&43 Enthusiasts everywhere. This is
the Smoothest Connector on the market today.
GHOST, Inc G42 PRO Trigger Connector for Glock 42 and 43's
The GHOST G42/G43 PRO is the best self-defense & Target trigger control connector
- This one fits only Glock 42 & 43.
- Average Reduction in trigger weight is 2.5 lbs.
- Lightest Stage Free Trigger
- Smoother Than any other Trigger
- Shorter Pull Eliminates Over Travel
- Perfect Function
- Fits Glock 42 & 43
- Ghost Lifetime Guarantee
- Minor Fitting Required
Ghost makes! The G42/G43 PRO is Smoother, Lighter, Shorter and eliminates trigger
Over-travel! These attributes give you the fastest most accurate first shot hit advantage
of any self-defense Glock style trigger.
HIT FIRST & FAST WITH THE PRO The G42/G43 PRO fixes the Glock bump or glitch, this
is the pre-travel resistance you feel and must overcome when the trigger bar bumps into
the connector. This bump causes you to apply excessive force and will move the pistol off
target. Another thing the G42/G43 PRO corrects is trigger over-travel; the excessive
movement of the trigger after the pistol fires. Over-travel causes the pistol to move off of
alignment with the target, making your shot go low and to one side.
G42/G43 PRO KEEPS YOU ON TARGET The G42/G43 PRO is the best self-defense connector
made! We believe that this trigger control connector makes all others obsolete. Once you
try it, we know you will agree! Minor fitting required. This Connector is For CCW
Self-Defense. Recommended: A gunsmith or armorer should install this connector. PLEASE
NOTE : THIS IS NOT A DROP IN TRIGGER CONNECTOR Small flat Swiss file needed. Returns
will not be accepted after any modifications have been made to this connector.
DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc.
and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH.
Neither Cactus Tactical, nor this site are affiliated in any manner with, or
otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of GLOCK
on this page is merely to advertise the sale of GLOCK pistols, parts, or
components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and
parts visit GLOCK | Perfection.Cactus Tactical HomepageCactus Tactical's Shotgun-Gear.comCheck out our BLOGRemember: when you purchase through cactustactical.com orders of $150 and over SHIP FREE.
(As always, free in store pick-up)
301 W Deer Valley Rd, Suite #6
Phoenix, AZ 85027